MENS SANA IN CORPORE SANO - YEN DIJIWIT LORO OJO NJIWIT - بِسْــــــــــــــــــمِ اﷲِالرَّحْمَنِ اارَّحِيم

Buy Mobiles & Tablets at Lazada Online Shopping Mall

Archive

Jumat, 26 November 2010

Seeting Modem Speedy berbagai merk

Adsl Modem SMC
Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:
 
  • Klik WAN
  • Clik ATM PVC
  • Klik VCI
  • Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  • Klik Save Settings

Setting PPPoE:


  • Klik WAN
  • Clik ATM PVC
  • Klik VCI
  • Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
  • Klik Save Settings


Adsl Modem ZyXeL
P-660R
Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge
 
  • Pilih Network
  • Pilih WAN
  • Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
  • Pilih Maintenance
  • Pilih Tools
  • Restart

Setting PPPoE
 
  • Pilih Network
  • Pilih WAN
  • Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
  • Klik Maintenance
  • Klik Tools
  • Restart

Adsl Modem Shiro
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced
  • Klik WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
  • Save Settings
  • Restart Router

Setting PPPoE:


  • Pilih Advanced
  • Klik WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
  • Save Settings
  • Restart Router


Adsl Modem Aztech
Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge
 
  • Klik Advanced
  • Pilih WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
  • Save Settings
  • Restart

Setting PPPoE/Router:
 
  • Klik Advanced
  • Pilih WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
  • Save Settings
  • Restart

Adsl Modem TECOM
AR1031
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Setting PPPoE:


  • Klik Advanced Setup
  • Klik WAN
  • Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Cheklist Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Modem Prolink


  • Login To -> http:// 10.0.0.2
    User Name: admin
    Password: password
    Klik . . . . OK
  • Chose Configurasi WAN:
  • Select Adapter: Pilih Pvc3 (Indonesia)
  • Edit Field:
    Bridge = Enable
    Encapsulation = 1483 Bridge IP LLC
    ATM VPI = 8
    ATM VCI = 81
  • Static IP Setting: � just blank �
    IP Address = just empty
    Subnet Mask = just empty
    Gateway = just empty
    User Name = username@telkom.com. . . . . . ( optional ) *
    Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
    * If you choose to put username & password there just double clik explorer
    * If you not choose to put username & password there you have to create new connection at Network Connection
  • Create New Connection (Bridge) See here..>>
  • Than Next:
  • * Klik Submit
  • * Klik Save Configuration
  • Next: Save Reboot ....

Adsl Modem D-Link
DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Setup
  • Klik Connection
  • Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
  • Klik Tools
  • Klik System Commands, Save All, Restart


Setting PPPoE/Router:


  • Klik Setup
  • Klik Connection
  • Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
  • Klik Tools
  • Klik System Commands. Save All, Restart


adsl Modem Repotec


  • Buka Internet Explorer ketik: http://192.168.1.1
  • Username: admin & Password: epicrouter
  • Klik: OK
  • Klik WAN
  • Pic Adapter: Pvc0
  • Klik Submit
  • Virtual Circuit = Enabled
  • Bridge & IGMP = Disable
  • Each region was different from another region and for Bandung vpi:8 , vci: 81
  • Service Category = UBR without PCR
  • Protocol/Conection type = PPPoE
  • Encapsulation = LLC/Snap-Bridging
  • Put Username & Password from your provider
  • Klik Submit.
  • Klik Save Configuration (wait till Saving configuration done.)
  • put DNS: 202.134.0.155 & 202.134.2.5

Adsl Modem Dareglobal
Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot

Setting PPPoE:


  • Klik Advanced Setup
  • Klik WAN
  • Cari VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Centang Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot

Adsl Modem TP-Link
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Setting PPPoE:


  • Klik Advanced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Cheklist Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Sumber : http://www.telkomspeedy.com/index.php/main/modem/setting/Setting.Modem

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)